軸裝式圓弧圓柱蝸杆減速器
Shaft round cylinder worm decelerator
一、概述 Brief
軸裝式圓弧圓柱蝸杆減速器，采用圓環面蝸輪包絡成形(ZC1型)圓柱蝸杆.蝸輪齒形與蝸杆共轭，它适用于冶金，起重，運輸、建築，化工、礦山、輕紡等傳動機械的(de)減速機構，可以在國民經濟各部門廣泛使用。本系列減速器功率範圍在0.59 ~ 75.84kW之間，輸出扭矩在180~ 7077N.m之間，輸入軸轉數一般不大于1500轉1分，高速軸可正反兩向運轉，工作環境溫度爲-40'C ~+40'C之間，當工作環境溫度低于0"C時，啓動前潤滑油必須加溫到0'C以上。
The round grinding wheel enveloping (ZC1) cylinder worm is applied in this shaft round cylinder worm decelerator. The tooth of worm gear and worm is conjugated. It is wide applied in metallurgy, lifting, transportation, building, chemical, mining and light industry. The power ranges from 0.59-75.84KW, the output torque locates between 180-7077N.m. The input rotating speed is no more than 1500r/min. The ambient temperature is -40"C ~ +40"C the lubricating oil must be heated up to 0'C if the temperature is below 0'C.
