ZJ型減速器
ZJ型減速器是平等軸成折線布置，二級圓柱硬齒面齒輪傳動.是采用漲圈無鍵聯接和接觸式模塊逆止器等結構的(de)套裝式減速器。
ZJ型減速器主要用于固定式輸送機，特别在鬥式提升機中得(de)到廣泛應用，也運用于其它多種機械傳動中。
工作條件
輸入軸轉速不大于1500r/min;
工作環境溫度爲-20"C~ +45'C.當環境溫度低于0'C時，必須采用潤滑油加熱裝置，使油溫超過0'C時才能啓動。
可正反兩向運轉。
型式
裝配型式ZJ型減速器按空心輸出軸端分爲悶蓋(m)和通蓋(T).輸出端的(de)旋轉方向有雙向(L),順時針單向(S)，逆時針單向(N): 按輸軸裝配型式分爲右(1)裝和左裝(11)。減速器共有12種裝配型式。
ZJ decelerator
ZJ decelerator is a set decelerator with equql shaft diagonal in stallation,two stage hard tooth gear driving,up ring no-shaft connection and tangent model arrester.
Zj decelerator is applied in ftting transporter especially in lifter.
working condition
The input shaft rotating speed in no more than 1 500r/min
The ambient temperature is ,the lubricating oil must be heated up to 0'C when it is below that.
Both forward and backward operation are applied.
Type
Installing form
The hollow shaft edge of ZJdecelerator has type,hole edge and close edge. The rotating direction are double direction(L)," S”clockwise direction,”N”--anticlockwise and single direction. the shaft installing form are left and right installation.there are totally 12 installing form below.
